因业务调整,部分个人测试暂不接受委托,望见谅。
内燃机排放检测
内燃机排放检测是指对内燃机在工作时所产生的废气进行分析和检测,以评估内燃机的排放是否符合相关标准和法规,保障环境空气质量和人们健康。
检测范围
内燃机排放检测包括柴油机、汽油机、涡轮增压机等各类内燃机的废气排放的检测。
检测项目分类
内燃机排放检测项目主要分为固体颗粒物的检测、氮氧化物排放检测、一氧化碳和二氧化碳排放检测、碳氢化合物排放检测、氧气含量检测等。
检测方法和检测仪器
常用的内燃机排放检测方法包括稀释法和不稀释法,检测仪器包括气体分析仪、质谱仪、颗粒物计数器、烟度计、动态排放测试系统等。
服务优势
内燃机排放检测在车辆尾气排放监管、环境保护、卫生安全等领域发挥着重要作用。检测准确性高、结果可靠,有助于企业合规运营,优化环境保护,保障公共健康与安全。
内燃机排放 和定义检测标准列举
GB/T 8188-2017 往复式内燃机 排放术语和定义Internal combustion engine--Emissions terminology and nomenclature
JB/T 14420-2023 内燃机 排放后处理催化剂 分类和命名规则
GB/T 38340-2019 小艇往复式内燃机排放测量气体和颗粒排放物的试验台测量
GB/T 8190.3-2003 往复式内燃机 排放测量 第3部分:稳态工况排气烟度的定义和测量方法Reciprocating internal combustion engines--Exhaust emission measurement--Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
GB/T 8190.2-2011 往复式内燃机 排放测量 第2部分:气体和颗粒排放物的现场测量Reciprocating internal combustion engines. Exhaust emission measurement. Part 2:Measurement of gaseous and particulate exhaust emissions at site
GB/T 8190.5-2019 往复式内燃机排放测量第5部分:试验燃料Reciprocating internal combustion engines. Exhaust emission measurement. Part 5:Test fuels
GB/T 726-1994 往复式内燃机 旋转方向、气缸和气缸盖上气门的标志及直列式内燃机右机、左机和发动机方位的定义Reciprocating internal combustion engines--Designation of the cylinders
JB/T 11083-2011(2017) 内燃机用光整机Finishing machines for internal combustion engines
JB/T 13975-2020 内燃机共轴泵
JB/T 11083-2011 内燃机用光整机
GB/T 8190.6-2022 往复式内燃机 排放测量 第6部分:测量结果和试验报告Reciprocating internal combustion engines—Exhaust emission measurement—Part 6: Report of measuring results and test
JB/T 10957-2010 内燃机用快速接头
GB/T 8190.1-2023 往复式内燃机 排放测量 第1部分:气体和颗粒排放物的试验台测量系统Reciprocating internal combustion engines—Exhaust emission measurement—Part 1:Test-bed measurement systems of gaseous and particulate emissions
JB/T 10957-2010(2017) 内燃机用快速接头Quick-action couplings used for internal combustion engines
GB/T 23340-2018 内燃机 连杆 技术条件Internal combustion engines--Connecting-rods--Specification
GB/T 23339-2018 内燃机 曲轴 技术条件Internal combustion engines--Crankshafts--Specification
GB/T 4556-2001 往复式内燃机 防火Reciprocating internal combustion engines--Fire protection
JB/T 12659-2016 内燃机 机油冷却滤清模块
JB/T 8415-2011(2017) 内燃机 正时齿轮 技术条件Internal combustion engines — Timing gears — Specifications
GB/T 20787-2006 往复式内燃机 中、高速往复式内燃机底脚结构噪声测试规范Reciprocating internal combustion engines--Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
CNS 12118-1987 内燃机用火星塞Spark Plugs for Internal Combustion Engines
JB/T 8118-1997(2009) 内燃机活塞销技术条件
JB/T 8415-2011 内燃机 正时齿轮 技术条件
JB/T 8118-1997(2017) 内燃机活塞销技术条件
CNS 8953-1987 陆用小型内燃机汽缸Cylinder for Small Internal Combustion Engines of Land Use
CNS 3176-1970 内燃机用活塞环Piston Ring for Internal Combustion Engine (Tentative)
JB/T 8127-2011 内燃机 燃油加热器Internal combustion engines--Fuel heaters
JB/T 12659-2016(2017) 内燃机 机油冷却滤清模块
JB/T 7294-2018 内燃机 气门推杆 技术条件
JB/T 6723.3-2018 内燃机冷却风扇 第3部分:冷凝式内燃机冷却风扇 技术条件
更多内燃机排放 和定义检测标准可咨询工程师,工程师会根据不同产品类型的特点、不同行业和不同国家的法规标准以及客户的需求,选取相应标准的项目和方法进行内燃机排放 和定义检测。