因业务调整,部分个人测试暂不接受委托,望见谅。
密封管螺纹圆柱内螺纹与圆锥外螺纹检测
密封管螺纹圆柱内螺纹与圆锥外螺纹检测是一项重要的质量控制措施,以确保螺纹连接的精准度和牢固性。以下是关于该检测的详细信息:
检测范围:
该检测范围主要包括密封管螺纹的圆柱内螺纹和圆锥外螺纹,以确认其符合标准要求。
检测项目分类:
1. 螺纹尺寸测量:包括螺距、牙型和螺纹公差的测量。
2. 螺纹形状检测:检测螺纹的垂直度、同心度和平行度。
3. 螺纹表面质量检测:检测螺纹表面的粗糙度、划伤和氧化等表面质量问题。
检测方法和检测仪器:
常用的检测方法包括光学测量、三坐标测量和螺旋测微计等。而用于检测的仪器包括光学投影仪、三坐标测量仪、螺纹测微计等。
服务优势:
1. 高精度:通过先进的检测设备和方法,确保螺纹连接的高精度和可靠性。
2. 快速反馈:快速检测结果反馈,帮助客户及时调整生产和设计方案。
3. 可追溯性:通过记录详细的检测数据和报告,确保产品质量可追溯,提高客户信任度。
密封管螺纹圆柱内螺纹与圆锥外螺纹检测对于确保产品质量和安全具有重要作用,需要依赖正规的检测服务来保障。
密封管螺纹圆柱内螺纹与圆锥外螺纹检测标准列举
GB/T 7306.1-2000 55°密封管螺纹 第1部分:圆柱内螺纹与圆锥外螺纹Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
GB/T 7306.2-2000 55°密封管螺纹 第2部分:圆锥内螺纹与圆锥外螺纹Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
GB/T 22091.1-2008 55°密封管螺纹量规 第1部分:用于检验圆柱内螺纹与圆锥外螺纹Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 1:Verification of parallel internal and taper external threads
GB/T 118-2000 内螺纹圆锥销Taper pins with internal thread
CNS 8779-1982 圆柱销(有内螺纹)Parallel Pins with Internal Thread
CNS 10792-1984 公制推拔外螺纹与配用之平行内螺纹(标称尺度及公差)Metric Tapered External Screw Threads with Mating Parallel Internal Screw Threads (Nominal Dimensions and Permissible Deviations)
JB/T 13929-2020 60°密封圆柱管螺纹丝锥
JB/T 8364.2-2010(2017) 60°圆锥管螺纹刀具 第2部分:60°圆锥管螺纹丝锥Tools for taper pipe threads with 60°thread angle-Part 2:Taps for taper pipe threads with 60°thread angle
JB/T 8364.2-2010 60°圆锥管螺纹刀具 第2部分:60°圆锥管螺纹丝锥
JB/T 8364.4-2010 60°圆锥管螺纹刀具 第4部分:60°圆锥管螺纹搓丝板
JB/T 8364.1-2010(2017) 60°圆锥管螺纹刀具 第1部分:60°圆锥管螺纹圆板牙Tools for taper pipe threads with 60°thread angle-Part 1:Circular screwing die for taper pipe threads with 60°thread angle
JB/T 8364.1-2010 60°圆锥管螺纹刀具 第1部分:60°圆锥管螺纹圆板牙
JB/T 8364.4-2010(2017) 60°圆锥管螺纹刀具 第4部分:60°圆锥管螺纹搓丝板Tools for taper pipe threads with 60°thread angle-Part 4:Thread rolling flat dies for taper pipe threads with 60°thread angle
GB/T 20333-2023 圆柱和圆锥管螺纹丝锥的基本尺寸和标志 Taps for parallel and taper pipe threads general dimensions and marking
JB/T 8364.5-2010 60°圆锥管螺纹刀具 第5部分:60°圆锥管螺纹滚丝轮
JB/T 9999-2013 55°圆锥管螺纹搓丝板
JB/T 9999-2013(2017) 55°圆锥管螺纹搓丝板Thread rolling flat dies for taper pipe threads with 55° thread angle
JB/T 8364.5-2010(2017) 60°圆锥管螺纹刀具 第5部分:60°圆锥管螺纹滚丝轮Tools for taper pipe threads with 60°thread angle. Part 5:Thread rolling cylindrical dies for taper pipe threads with 60°deg.thread angle
GB/T 12716-2011 60°密封管螺纹Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads
JB/T 8364.3-2010 60°圆锥管螺纹刀具 第3部分:60°圆锥管螺纹丝锥 技术条件
JB/T 8364.3-2010(2017) 60°圆锥管螺纹刀具 第3部分:60°圆锥管螺纹丝锥 技术条件Tools for taper pipe threads with 60°thread angle-Part 3:Taps for taper pipe threads with 60°thread angle-Technical specification
GB/T 20328-2023 R系列圆锥管螺纹圆板牙Circular screwing dies of R series for taper pipe threads
JB/T 10000-2013(2017) 55°圆锥管螺纹滚丝轮Thread rolling cylindrical dies for taper pipe threads with 55° thread angle
JB/T 10000-2013 55°圆锥管螺纹滚丝轮
GB/T 20328-2006 R系列圆锥管螺纹圆板牙Circular dies for taper pipe threads--R series
JB/T 10031-2019 55°密封管螺纹量规
GB/T 27944-2011 60°干密封管螺纹Dryseal pipe threads with the thread angle of 60 degrees
GB/T 7307-2001 55°非密封管螺纹Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
GB/T 29537-2013 80°非密封管螺纹Pipe threads with 80 degree thread angle wherepressure-tight joints are not made on the threads
HB 4265-2004(2010) 安装钢丝螺套内螺纹的螺纹塞规Internal screw gauge for wire thread insert
更多密封管螺纹圆柱内螺纹与圆锥外螺纹检测标准可咨询工程师,工程师会根据不同产品类型的特点、不同行业和不同国家的法规标准以及客户的需求,选取相应标准的项目和方法进行密封管螺纹圆柱内螺纹与圆锥外螺纹检测。