因业务调整,部分个人测试暂不接受委托,望见谅。
表面结构轮廓法:表面粗糙度参数检测
表面粗糙度是描述物体表面不平整度的参数之一,表面结构轮廓法是一种常用的检测方法。通过该方法可以全面地了解物体表面的粗糙度情况,为产品质量控制和工艺改进提供重要参考。
检测范围
表面结构轮廓法主要适用于各种材料的表面粗糙度检测,特别是对于需要控制表面质量的高精度工艺产品的检测。比如精密机械零件、光学器件、半导体器件等领域。
检测项目分类列举
常见的表面粗糙度参数包括:
- 平均粗糙度Ra
- 最高峰-谷值Rz
- 峰值周期Sp
- 峰谷间距Sm
检测方法和检测仪器列举
表面结构轮廓法一般采用激光干涉仪、接触式表面粗糙度仪等设备进行检测。这些仪器能够对被测表面的微小变化进行高精度测量。检测时,通过设备对表面进行扫描,获取大量的数据,并通过计算得出各项表面粗糙度参数。
服务优势
表面结构轮廓法检测具有以下服务优势:
- 高精度:能够检测到微小的表面变化。
- 全面性:能够提供多项粗糙度参数,全面评估表面质量。
- 可追溯性:检测数据可追溯,确保检测结果的可靠性。
- 快速性:通过自动化设备,可以实现快速检测,提高工作黄金城集团官网。
表面结构轮廓法在工业生产和质量控制中具有重要作用,通过该方法可以有效提高产品的质量稳定性和生产黄金城集团官网,对于确保产品质量和提升竞争力具有重要意义。
表面结构轮廓法 表面粗糙度 参数检测标准列举
GB/T 1031-2009 产品几何技术规范(GPS) 表面结构 轮廓法 表面粗糙度参数及其数值Geometrical Product Specifications (GPS)--Surface texture:Profile method--Surface roughness parameters and their values
GB/T 7220-2004 产品几何量技术规范(GPS)表面结构 轮廓法 表面粗糙度 术语 参数测量Geometrical Product Specifications(GPS)--Surface texture--Profile method--Surface roughness--Terminology--Measurement of surface roughness parameters
GB/T 12472-2003 产品几何量技术规范(GPS)表面结构 轮廓法 木制件表面粗糙度参数及其数值Geometrical Product Specifications(GPS)-Surface texture:Profile method-Surface roughness parameters and their values for wooden pieces
JB/T 7976-2010 轮廓法测量表面粗糙度的仪器 术语
JB/T 7976-2010(2017) 轮廓法测量表面粗糙度的仪器 术语Instrument for the measurement of surface roughness by the profile method——Terms
GB/T 14495-2009 产品几何技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度比较样块Geometrical Product Specifications(GPS)--Surface texture:Profile method--Roughness comparision specimens for wooden pieces
GB/T 12767-1991 粉末冶金制品 表面粗糙度 参数及其数值Powder metallurgy products--Surface roughness--Parameters and their values
GB/T 14234-1993 塑料件表面粗糙度Surface roughness for plastic parts
CNS 10793-1984 表面粗糙度比较标准片Roughness Comparison Specimens
HB 6172-1988 一般表面粗糙度
GB/T 29505-2013 硅片平坦表面的表面粗糙度测量方法Test method for measuring surface roughness on planar surfaces of silicon wafer
GB/T 13841-1992 电子陶瓷件表面粗糙度Surface roughness for electronic ceramic parts
WJ/Z 314-1991 信零件表面粗糙度
GB/T 15056-2017 铸造表面粗糙度 评定方法Evaluation method on cast surface roughness
GB/T 13288.3-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法Preparation of steel substrates before application of paints and related products--Surface roughness characteristics of blast-cleaned steel substrates--Part 3:Method for the calibration of ISO surface profile
CNS 15238-2008 纸及纸板表面粗糙度试验法(Print-surf法)Method of test for roughness in paper and board(Print–surf method)
JJG (轻工) 117-2000 印刷表面粗糙度仪检定规程
JJF 1099-2018 表面粗糙度比较样块校准规范
JJF 1210-1990 表面粗糙度基准操作技术规范Operating Technical Norm of Surface Raughness Standard
GB/T 13288.4-2013 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法Preparation of steel substrates before application of paints and related products—Surface roughness characteristics of blast-cleaned substrates—Part 4:Method for the calibration of ISO surface profile comparator and for the determination of surface prof
CNS 10794-1984 触针式表面粗糙度测定仪Instruments for the Measurement of Surface Roughness by the Stylus Method
GB/T 11357-2020 带轮的材质、表面粗糙度及平衡Quality roughness and balance of transmission pulleys
GB/T 42671-2023 炭素材料表面粗糙度试验方法Test method for surface roughness of carbon materials
GB/T 13288.1-2008 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分:用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义Preparation of steel substrates before application of paints and related products--Surface roughness characteristics of blast-cleaned substrates--Part 1:Specification and definitions for ISO surface profile comparators for the assessment of abrasive
GB/T 31199-2014 计算机直接制版版基(CTP版基) 表面粗糙度参数的测定Surface roughness parameters measurement for CTP plate substrate
GB/T 13288.5-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分:表面粗糙度的测定方法 复制带法Preparation of steel substrates before application of paints and related products --Surface roughness characteristics of blast-cleaned steel substrates --Part 5:Replica tape method for the determination of the surface profile
GB/T 6060.1-2018 表面粗糙度比较样块 第1部分:铸造表面Roughness comparison specimens--Cast surfaces
JJG 2018-1989 表面粗糙度计量器具检定系统表Verification Scheme of Measuring Instruments for Surface Roughness
GB/T 6060.2-2006 表面粗糙度比较样块 磨、车、镗、铣、插及刨加工表面Roughness comparison specimens--Ground, turned, bored,milled, shaped and planed
JJF 1105-2018 触针式表面粗糙度测量仪校准规范
更多表面结构轮廓法 表面粗糙度 参数检测标准可咨询工程师,工程师会根据不同产品类型的特点、不同行业和不同国家的法规标准以及客户的需求,选取相应标准的项目和方法进行表面结构轮廓法 表面粗糙度 参数检测。