因业务调整,部分个人测试暂不接受委托,望见谅。
表面粗糙度比较样块电火花抛(喷)丸喷砂研磨锉抛光加工表面检测
表面粗糙度比较样块电火花抛(喷)丸喷砂研磨锉抛光加工表面检测是在工业生产中常见的一项检测工作。根据加工工艺或要求的表面粗糙度等级,通过不同的加工方法,可以将表面加工为不同的粗糙度,以满足产品的具体需求。
检测范围
检测范围广泛,可以涵盖金属、塑料、木材等各类材料的加工表面。
检测项目分类
检测项目主要包括以下几类:
- 电火花抛(喷)丸现场检测
- 喷砂研磨检测
- 锉抛光表面检测
检测方法和检测仪器
常见的表面粗糙度检测方法包括轮廓仪检测、光学仪器检测等。在工业生产中,常用的检测仪器包括二维测量仪、三维扫描仪等。
服务优势
表面粗糙度比较样块电火花抛(喷)丸喷砂研磨锉抛光加工表面检测服务具有快速、准确、可靠的特点,可以有效确保产品符合要求的表面质量标准,提升产品的市场竞争力。
表面粗糙度比较样块电火花抛(喷)丸喷砂研磨锉抛光加工表面检测标准列举
GB/T 6060.3-2008 表面粗糙度比较样块 第3部分:电火花、抛(喷)丸、喷砂、研磨、锉、抛光加工表面Surface roughness comparison specimen--Part 3:Spark-eroded,shot-blasted,grit-blasted,lapped,filed and polished surface
JJF 1099-2018 表面粗糙度比较样块校准规范
GB/T 6060.2-2006 表面粗糙度比较样块 磨、车、镗、铣、插及刨加工表面Roughness comparison specimens--Ground, turned, bored,milled, shaped and planed
GB/T 6060.1-2018 表面粗糙度比较样块 第1部分:铸造表面Roughness comparison specimens--Cast surfaces
GB/T 14495-2009 产品几何技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度比较样块Geometrical Product Specifications(GPS)--Surface texture:Profile method--Roughness comparision specimens for wooden pieces
CNS 10793-1984 表面粗糙度比较标准片Roughness Comparison Specimens
GB/T 13288.4-2013 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法Preparation of steel substrates before application of paints and related products—Surface roughness characteristics of blast-cleaned substrates—Part 4:Method for the calibration of ISO surface profile comparator and for the determination of surface prof
GB/T 13288.3-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法Preparation of steel substrates before application of paints and related products--Surface roughness characteristics of blast-cleaned steel substrates--Part 3:Method for the calibration of ISO surface profile
GB/T 13288.1-2008 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分:用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义Preparation of steel substrates before application of paints and related products--Surface roughness characteristics of blast-cleaned substrates--Part 1:Specification and definitions for ISO surface profile comparators for the assessment of abrasive
GB/T 13288.2-2011 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第2部分:磨料喷射清理后钢材表面粗糙度等级的测定方法 比较样块法Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure
GB/T 14234-1993 塑料件表面粗糙度Surface roughness for plastic parts
HB 6841-1993 塑料模具型腔表面粗糙度样块和塑料样板技术要求及评定方法
HB 6172-1988 一般表面粗糙度
SJ/T 11503-2015 碳化硅单晶抛光片表面粗糙度的测试方法
SJ/T 11503-2015(2017) 碳化硅单晶抛光片表面粗糙度的测试方法
GB/T 29505-2013 硅片平坦表面的表面粗糙度测量方法Test method for measuring surface roughness on planar surfaces of silicon wafer
GB/T 13841-1992 电子陶瓷件表面粗糙度Surface roughness for electronic ceramic parts
WJ/Z 314-1991 信零件表面粗糙度
GB/T 15056-2017 铸造表面粗糙度 评定方法Evaluation method on cast surface roughness
JJG (轻工) 117-2000 印刷表面粗糙度仪检定规程
JJF 1210-1990 表面粗糙度基准操作技术规范Operating Technical Norm of Surface Raughness Standard
CNS 10794-1984 触针式表面粗糙度测定仪Instruments for the Measurement of Surface Roughness by the Stylus Method
GB/T 11357-2020 带轮的材质、表面粗糙度及平衡Quality roughness and balance of transmission pulleys
GB/T 42671-2023 炭素材料表面粗糙度试验方法Test method for surface roughness of carbon materials
JB/T 7976-2010(2017) 轮廓法测量表面粗糙度的仪器 术语Instrument for the measurement of surface roughness by the profile method——Terms
GB/T 13288.5-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分:表面粗糙度的测定方法 复制带法Preparation of steel substrates before application of paints and related products --Surface roughness characteristics of blast-cleaned steel substrates --Part 5:Replica tape method for the determination of the surface profile
JB/T 11552-2013 抛喷丸强化 技术条件
JB/T 7976-2010 轮廓法测量表面粗糙度的仪器 术语
GB/T 12767-1991 粉末冶金制品 表面粗糙度 参数及其数值Powder metallurgy products--Surface roughness--Parameters and their values
JB/T 11552-2013(2017) 抛喷丸强化 技术条件
更多表面粗糙度比较样块电火花抛(喷)丸喷砂研磨锉抛光加工表面检测标准可咨询工程师,工程师会根据不同产品类型的特点、不同行业和不同国家的法规标准以及客户的需求,选取相应标准的项目和方法进行表面粗糙度比较样块电火花抛(喷)丸喷砂研磨锉抛光加工表面检测。